Don't worry, it takes some time, but it will stop blinking and your system should boot after a short waitĮDIT: If you still experience problems, try this: Remove the CMOS battery from the motherboard, wait a few seconds, put the battery back in. When booting your System for the first time, the CPU Debug LED might be lit for some seconds. Give it another minute before you remove the USB Stick Plug the USB Stick into the Flashback+ USB Port (usually the port all the way top left with a red frame)Ī (red) LED should flash for a few minutes Get your Mainboard and Plug in the 8 Pin and 24 Pin Take the File with the Name "E." and put it on your FAT32 USB Stick Look into this if you experience problems.ĭownload the official BIOS from MSI *LINK* You gotta format the USB-Drive to FAT32 EDIT: Some People mentioned, that the partition table needs to be MBR rather than GPT. You'll need a USB Stick (USB 2.0 seems to help with some issues, but USB 3.0 is also officially supported) After I had some problems regarding MSI's Flashback+ (MSI removing the BIOS download / some things left out in the Mainboard Manual), I thought I'd write a tutorial on the whole process, to help people who might be a bit desperate after running into troubles.
0 Comments
Leave a Reply. |